Ecobee AC Blowing Warm Air: 3 Ways To Solve

Ecobee AC Blowing Warm Air: 3 Ways To Solve

Let me share a funny experience with you. 

It was the month of July in my hometown. The whole day was hot and humid, so I cranked up my Ecobbe to “Cool” and tried to sleep. 

Everything was fine for the first few hours, but out of nowhere, the AC started to blow warm air in the middle of the night. Eventually, my sweet sleep was compromised, and I was miserable for the next 24 hours. 

So, if you are facing a similar issue of – Ecobee AC Blowing Warm Air. Here are 3 tried and tested solutions that you should try. 

Ecobee AC Blowing Warm Air

If your Ecobee AC is blowing warm air, there are several things that you can check to solve the issue. 

Start by checking your thermostat settings and air filter to ensure that they are set correctly and in good condition. If these are both in order, then you may need to have a professional HVAC technician diagnose and repair any issues with your AC system. 

Why is Ecobee AC Blowing Warm Air

Incorrect wiring

If the thermostat is not properly wired to the HVAC system, it may not be able to control the heat. 

Power issues 

If the thermostat is not receiving power, it will not be able to control the heating system. This can be caused by a tripped breaker, a blown fuse, or a damaged power cord.

Dirty Air Filter

A dirty air filter can cause your heating system to work harder than necessary, which can lead to the auxiliary heat running too long. 

A dirty air filter restricts airflow, making it harder for your heating system to heat your home. Check and replace your air filter if needed.

Obstructions in the Outdoor Unit

If you have a heat pump system, the outdoor unit may have obstructions that are interfering with its operation.

Debris, such as leaves, grass, and other materials, can clog the outdoor unit, making it harder for the system to operate efficiently. 

Clear any obstructions from the outdoor unit to ensure that it is operating at peak performance.

Damaged or Loose Thermostat Wiring

Damaged or loose wiring between the thermostat and the heating system can cause the auxiliary heat to run too long. 

Check the wiring between your thermostat and heating system to ensure that it is correctly connected and that there are no loose or damaged wires.

If your device is incurring the same problem, then here are 3 remedies you should try. 

1. Check Your Thermostat Settings

Your thermostat settings should always be checked when your Ecobee AC is blowing warm air. 

Make sure your thermostat is on the “cool” setting and that the temperature is set lower than the ambient temperature in the room. 

Check to see whether the “fan” setting is set to “auto” rather than “on.” If the fan is set to “on,” it will run nonstop even if the air conditioner is not really cooling it.

2. Check Your Air Filter

Your air conditioner may blast hot air if your air filter is unclean. 

To guarantee appropriate airflow, it is advised that you inspect and change your air filter at least once every three months. 

If your air filter is clogged, change it out with a fresh one and check to see if your Ecobee AC stops spewing heated air.

3. Check Your AC System

If your thermostat settings and air filter are both in good working order, the problem might be caused by the AC system itself. 

A refrigerant leak is a typical source of warm air coming from your air conditioner. Low refrigerant levels may cause your air conditioner to emit warm air. 

If you suspect a refrigerant leak, contact a professional HVAC expert to diagnose and repair the problem.

Ecobee AC still blowing warm air? 

If the issue isn’t solved, then there might be something wrong with the compressor unit. 

The compressor is responsible for compressing the refrigerant in your AC system, and if it is not working correctly, it can cause your AC to blow warm air. 

Again, it’s best to contact a professional HVAC technician to diagnose and repair any issues with your compressor.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *